The SH8000R is the world’s first ultra-high pressure mobile waterblasting system with water recycling on-board. This model is identical to the SH8000 model that is now in 24 Countries worldwide but includes a closed-loop, water purification system which allows the spent water to be collected and reused over and over again.

The second application where the SH8000R excels for the road marking industry, is in the rapid removal of single, continuous or long lines. By positioning the blasting heads in a front-to-back tandem position, continuous lines can be removed at nearly twice the speed as with a single blasting head. Also, on very thick thermoplastic lines, the double blasting heads can be uniquely configured for quick and efficient removal. You simply cannot find a more diverse and productive line removal system for the road marking industry.

The SH8000R also removes painted runway markings on grooved runway surfaces without causing damage. Runways markings on grooved runways are often difficult to remove without causing damage to the runway grooves. Sometimes, the runway markings only need a good cleaning, rejuvenating their reflectivity and extending their useful life. The SH8000R performs this task with remarkable speed and efficiency.

For airports, the SH8000R offers the highest, rubber removal rates in the industry without causing damage to grooved or smooth surface runways. Depending on the overall condition of the runway surface, and the amount of rubber deposit build-up, the SH8000R consistently achieves removal rates of up to 20,000 square feet per hour with only one truck and a single operator. No chemicals, no detergents, no brooms and no secondary vacuum trucks. With the immediate vacuum recovery, the runway is immediately available for emergency landings during the cleaning process.

When the SH8000R is equipped with the tractor mounted blasting system, the removal and cleanings applications are numerous both on the airfield and the landside. On the airfield, the tractor unit is ideal for the removal or cleaning of taxiway, apron, and gate markings. The removal of oil and hydraulic stains is likewise easily accomplished. And as with every Stripe Hog system, new markings can be re-applied 20 minutes after the removal process.

On the landside, the SH8000R with the optional tractor unit will remove or clean road markings, pedestrian markings, and car park markings. It can also be used for the simple cleaning of sidewalks. The SH8000R with the optional tractor unit is simply the most comprehensive, complete, and conveniently operated captive waterblasting system in the world.

Operating Pressure:

40,000 psi (2750 bar)

Flow Rate:

12 gpm (44.6 lpm) for double blasting head

6 gpm (22.7 lpm) for optional, tractor mounted blasting head

Water Filtration:

1 micron absolute

Vacuum Recovery:

Roots blower @ 1,400 cfm (2378 m3/hr)

Water Supply:

2,700 gal. (10220 ltr) stainless steel

Vacuum Storage:

1,600 gal. (6056 ltr) stainless steel

Decibel Readings:

888 db @ 20 m

82.5 db @ 10 m

Engine:

Stripe Hog® components powered by truck engine

Horsepower / 335 hp minimum

Torque Rating:

1,550 ft. lbs. (2200 Nm) @ 1500 rpms

Front Axle:

Rear Axle:

Transmission (Gearbox):

Fully automatic or fully manual